MODEL C

Peerless Model C & F End Suction Pumps  - Click HERE for parts

CONTACT US: 1-317-203-3227

Full stock of pumps, motors, parts and pieces.  Ready for shipping within a day in most instances.

We are working daily to add more parts and pumps.  Contact us at info@masonoliversupply.com for more info.

PEERLESS C Model

   Peerless C610A    Peerless C615A     Peerless C620A     Peerless C810A       Peerless C815A

  Peerless C820A    Peerless C825A     Peerless C830A     Peerless C840A       Peerless C1020A

  Peerless C1025A  Peerless C1030A   Peerless C1040A   Peerless C1050A    Peerless C1125

  Peerless C1140     Peerless C1215A   Peerless C1220A   Peerless C1230A    Peerless C1240A

  Peerless C1250A

PEERLESS F Model LINK

PEERLESS PV Model LINK

The Peerless Pump C / F/ PV Series Pumps 

are close coupled with standard C-face JM or JP solid shaft ball bearing motors specifically designed for pump
applications in accordance with standards developed by the Hydraulic Institute (HI) and the National Electrical
Manufacturers Association (NEMA).

Applications
Peerless Pump Series C close coupled single suction pumps are designed for applications in medium duty
service and provide maximum pump value in heating, air conditioning, booster and general circulating service.

Features
Series C Pumps are available in cast iron bronze fitted and all iron construction. Packed boxes or mechanical
seals are available. Pump casing is fitted with a bronze/steel replaceable wear ring. The pipe connection
flanges are equivalent 125# ANSI flanges rated for 175# Maximum Working Pressure (MWP).

Motor bearings are grease lubricated and are sized for a minimum of 20,000 hours L10 basic rating life or 100,000
hours median bearing life. Shaft is designed to limit the shaft deflection to no more than .002” at the seal faces.

The motor/impeller shaft is protected with a replaceable (bronze/stainless steel) sleeve installed between the
shaft and the packing or mechanical seal. Mechanical seals are designed for water service and light hydrocarbons
light hydrocarbons up to 250F. Seals are face type with Ni-resist seat, carbon washer, 18-8 stainless steel metal
parts and Viton elastomers.

Series C pumps are furnished with enclosed dynamically balanced impellers for smooth, low vibration operation.
The impeller is keyed to the shaft for positive driving and is secured in place with a stainless steel washer and
self-locking cap screw.

The impeller diameter is no more than 90 percent of the maximum impeller diameter which the case tongue
or cut-water could accommodate. This design feature results in low hydraulic noise levels.